楊申語 教授 Prof. Sen-Yeu Yang辦公室 Office: 704
電話 Phone: 3366-2681 傳真 Fax: 2363-1755 電子郵件 E-mail: [email protected] 實驗室 Lab: 塑膠加工實驗室 127 經歷 EXPERIENCE臺灣大學, 機械工程學士, 1976
B.S. in Mechanical Engineering, National Taiwan University, 1976 紐約雪城大學, 機械工程碩士, 1982 M.S. in Mechanical Engineering, Syracuse University, 1982 明尼蘇達大學, 機械工程博士, 1990 Ph.D. in Mechanical Engineering, University of Minnesota, 1990 |
I. 研究領域 RESEARCH INTERESTS
塑膠加工、金屬成型
Polymer processing, Metal forming
II. 教學課程 TEACHING COURSES
精密與創新性之塑膠成型技術、微機電、微元件成型、微奈米壓印
Precise & Innovative Plastic Molding Technologies, MEMS, Micro/Nano Fabrication Technologies, Metal Forming, Micro-Injection Molding
III. 研究計劃 RESEARCH PROJECTS
1. 氣體輔助熱壓技術複製微奈米複合結構應用抗反射及超疏水性之應用與研究,主持人,行政院國家科學委員會,:2011/08/01~2012/07/31
2. 氣體輔助滾輪紫外光樹脂滾壓製程及墨水沾印技術之研發及應用,主持人,行政院國家科學委員會,2011/08/01~2013/07/31
3. 利用二氧化碳輔助PMMA熱接合製程開發與研究,主持人,宗倬章先生教育基金會,2011/1/1~2011/12/31
4. 氣輔熱壓及射出成型製作具複合微奈米結構支架之製程研究與設備開發,主持人,行政院國家科學委員會,2010/8/1~2011/7/31 (99-2221-E-002-100-)
5. 雷射微奈米玻璃模仁轉寫能力參數分析及最佳化之研究,主持人,工研院,2010/1/1~2010/12/31
6. 協鈺鋼模可分解塑膠材料模穴內持溫結晶技術開發,主持人,協鈺鋼模有限公司,2009/9/1~2011/2/28
7. 創新型CO2輔助成型技術開發,主持人,行政院國家科學委員會,2009/8/1~2010/10/31 (98-2221-E-002-014-)
8. 微型鏡頭陣列透鏡低溫壓印製程與設備開發,主持人,計畫期間:2008/8/1至2009/7/31,委任單位:行政院國家科學委員會 (97-2221-E-002-084-)
9. 精密塑膠光學元件複製成型技術與設備之開發研究(II),主持人,計畫期間:2007/8/1至2008/7/31,委任單位:行政院國家科學委員會 (96-2221-E-002-221-)
10. 微透鏡陣列滾輪式轉印製程之開發,主持人,計畫期間:2006/8/1至2008/7/31,委任單位:行政院國家科學委員會 (95-2221-E-002-045-MY2)
11. 精密塑膠光學元件模具與複製成型技術整合研究-子計畫一:精密塑膠光學元件複,主持人,計畫期間:2006/8/1至2007/7/31,委任單位:行政院國家科學委員會
12. 精密塑膠光學元件模具與複製成型技術整合研究-總計畫,主持人,計畫期間:2006/8/1 至2007/7/31,委任單位:行政院國家科學委員會(95-2221-E-002-212-)
13. 奈米壓印系統設備開發及製程研究-子計畫一:流體壓印設備開發研究,主持人,計畫期間:2005/8/1至2006/10/31,委任單位:行政院國家科學委員會(94-2212-E-002-038-)
14. 奈米壓印系統設備開發及製程研究-總計畫,主持人,計畫期間:2005/8/1至 2006/11/30,委任單位:行政院國家科學委員會(94-2212-E-002-037-)
15. 塑膠繞射光學元件之精密成型技術整合研究(II)-子計畫一:塑膠繞射光學元件之微透鏡陣列模仁製作及複製成型研究,主持人,計畫期間:2005/8/1至2006/10/31,委任單位:行政院國家科學委員會(94-2212-E-002-036-)
16. 塑膠繞射光學元件之精密成型技術整合研究(II)-總計畫,主持人,計畫期間:2005/8/1至2006/10/31,委任單位:行政院國家科學委員會(94-2212-E-002-035-)
IV. 研究著作 PUBLICATIONS
A. 期刊論文
A. SCI之期刊論文
B. 會議論文 CONFERENCE PAPERS
A. 國外會議論文 International Conference Papers
B. 國內會議論文
C. 專利 PATENTS
D. 專書 BOOKS
E. 得獎紀錄 HONORS
塑膠加工、金屬成型
Polymer processing, Metal forming
II. 教學課程 TEACHING COURSES
精密與創新性之塑膠成型技術、微機電、微元件成型、微奈米壓印
Precise & Innovative Plastic Molding Technologies, MEMS, Micro/Nano Fabrication Technologies, Metal Forming, Micro-Injection Molding
III. 研究計劃 RESEARCH PROJECTS
1. 氣體輔助熱壓技術複製微奈米複合結構應用抗反射及超疏水性之應用與研究,主持人,行政院國家科學委員會,:2011/08/01~2012/07/31
2. 氣體輔助滾輪紫外光樹脂滾壓製程及墨水沾印技術之研發及應用,主持人,行政院國家科學委員會,2011/08/01~2013/07/31
3. 利用二氧化碳輔助PMMA熱接合製程開發與研究,主持人,宗倬章先生教育基金會,2011/1/1~2011/12/31
4. 氣輔熱壓及射出成型製作具複合微奈米結構支架之製程研究與設備開發,主持人,行政院國家科學委員會,2010/8/1~2011/7/31 (99-2221-E-002-100-)
5. 雷射微奈米玻璃模仁轉寫能力參數分析及最佳化之研究,主持人,工研院,2010/1/1~2010/12/31
6. 協鈺鋼模可分解塑膠材料模穴內持溫結晶技術開發,主持人,協鈺鋼模有限公司,2009/9/1~2011/2/28
7. 創新型CO2輔助成型技術開發,主持人,行政院國家科學委員會,2009/8/1~2010/10/31 (98-2221-E-002-014-)
8. 微型鏡頭陣列透鏡低溫壓印製程與設備開發,主持人,計畫期間:2008/8/1至2009/7/31,委任單位:行政院國家科學委員會 (97-2221-E-002-084-)
9. 精密塑膠光學元件複製成型技術與設備之開發研究(II),主持人,計畫期間:2007/8/1至2008/7/31,委任單位:行政院國家科學委員會 (96-2221-E-002-221-)
10. 微透鏡陣列滾輪式轉印製程之開發,主持人,計畫期間:2006/8/1至2008/7/31,委任單位:行政院國家科學委員會 (95-2221-E-002-045-MY2)
11. 精密塑膠光學元件模具與複製成型技術整合研究-子計畫一:精密塑膠光學元件複,主持人,計畫期間:2006/8/1至2007/7/31,委任單位:行政院國家科學委員會
12. 精密塑膠光學元件模具與複製成型技術整合研究-總計畫,主持人,計畫期間:2006/8/1 至2007/7/31,委任單位:行政院國家科學委員會(95-2221-E-002-212-)
13. 奈米壓印系統設備開發及製程研究-子計畫一:流體壓印設備開發研究,主持人,計畫期間:2005/8/1至2006/10/31,委任單位:行政院國家科學委員會(94-2212-E-002-038-)
14. 奈米壓印系統設備開發及製程研究-總計畫,主持人,計畫期間:2005/8/1至 2006/11/30,委任單位:行政院國家科學委員會(94-2212-E-002-037-)
15. 塑膠繞射光學元件之精密成型技術整合研究(II)-子計畫一:塑膠繞射光學元件之微透鏡陣列模仁製作及複製成型研究,主持人,計畫期間:2005/8/1至2006/10/31,委任單位:行政院國家科學委員會(94-2212-E-002-036-)
16. 塑膠繞射光學元件之精密成型技術整合研究(II)-總計畫,主持人,計畫期間:2005/8/1至2006/10/31,委任單位:行政院國家科學委員會(94-2212-E-002-035-)
IV. 研究著作 PUBLICATIONS
A. 期刊論文
A. SCI之期刊論文
- Kuang-Li Lee, Pei-Wen Chen, Shu-Han Wu, Jhih-Bin Huang, Sen-Yeu Yang and Pei-Kuen Wei, “Enhancing Surface Plasmon Detection Using Template-Stripped Gold Nanoslit Arrays on Plastic Films”, ACS NANO, 27 March 2012, Page 2931-2939 (SCI)
- Chia-Lin Wu, Chen-Chung Li, Chia-Fong Lu, Sen-Yeu Yang, “Development of two step carbon dioxide assisted thermal fusion PMMA bonding process”, Microsystem Technologies, 14 February2012, Pages1-6 (SCI)
- Yung-Jin Weng, Sen-Yeu Yang, “Applying magnetic soft mold imprint technology with ultraviolet light-emitting-diode array on the fabrication of microlens arrays” Polymer-Plastics Technology and Engineering, Volume 22, Issue 5, 2011, Pages 748-752 (SCI)
- Tsung-Fu Yao, Ping-Han Wu, Tzong-Ming Wu, Chung-Wei Cheng, Sen-Yeu Yang, “Fabrication of anti-reflective structures using hot embossing with a stainless steel template irradiated by femtosecond laser”, Microelectronic Engineering, Volume 88, Issue 9, September2011, Pages 2908–2912 (SCI)
- Wei-Yi Chang, Kai-Heng Lin, Jing-Tang Wu, Sen-Yeu Yang, Kuang-Li Lee and Pei-Kuen Wei, “Novel fabrication of an Au nanocone array on polycarbonate for high performance surface-enhanced Raman scattering”, Journal of Micromechanics and Microengineering , Volume 21, Number 3, 2011 (SCI)
- Yung-Chun Weng, Yung-Jin Weng, Sen-Yeu Yang, “Electromagnetic Field-Aided Magnetic Soft Mold Reverse Imprinting Technology Applied in Microstructure Replication”, Polymer-Plastics Technology and Engineering, Volume 50, Issue 11, 2011, Pages 1077-1083 (SCI)
- Yi-Hao Huang, Jing-Tang Wu, Sen-Yeu Yang, “Direct fabricating patterns using stamping transfer process with PDMS mold of hydrophobic nanostructures on surface of micro-cavity”, Microelectronic Engineering, Volume 88, Issue 6, June 2011, Pages 849-854 (SCI)
- Wei-Yi Chang, Jing-Tang Wu, Kai-Heng Lin, Sen-Yeu Yang, Kuang-Li Lee, Pei-Kuen Wei,“Fabrication of gold sub-wavelength pore array using gas-assisted hot embossing with anodic aluminum oxide (AAO) template”, Microelectronic Engineering, Volume 88, Issue 6, June2011, Pages 909-913 (SCI)
- Weng, Yung Chun; Weng, Yung Jin; Fang, Huang Sheng; Yang, Sen Yeu, “Electromagnetic Imprint Technique Combined with Electrophoretic Deposition Technique in Forming Microelectrode Structures”, Japanese Journal of Applied Physics, Volume 50, Issue 4,2011, pp. 046502-046502-6 (SCI)
- Bin-Da Chan, Kuo-Huang Hsieh, Sen-Yeu Yang, “Thin film patterns directly fabricated using transfer stamping technique”, Journal of Micromechanics and Microengineering(2010) (SCI)(Accepted, in press)
- Jing-Tang Wu, Hsin-Chun Lai, Sen-Yeu Yang , Tzu-Chien Huang, and Sheng-Hsin Wu, “Dip coating cooperated with stepped rotating lithography to fabricate rigid microstructures onto a metal roller”, Microelectronic Engineering, Volume 87, Issue 11, November 2010, Pages 2091-2096(SCI)
- Jing-Tang Wu, Wei-Yi Chang and Sen-Yeu Yang, “Fabrication of a nano/micro hybrid lens using gas-assisted hot embossing with an anodic aluminum oxide (AAO) template”, Journal of Micromechanics and Microengineering, Volume 20, Number 7, 20 075023(2010) (SCI)
- Jing-Tang Wu, Ying-Ta Chu, Sen-Yeu Yang, Chen-Chung Li , “Low-temperature embossing technique for fabrication of large-area polymeric microlens array with supercritical carbon dioxide”, Microelectronic Engineering, Volume 87, Issue 12, December 2010, Pages 2620-2624(SCI)
- Jing-Tang Wu and Sen-Yeu Yang, ” A gasbag-roller-assisted UV imprinting technique for fabrication of a microlens array on a PMMA substrate”, Journal of Micromechanics and Microengineering, 20(2010) 085038(SCI)
- SJ Liu, YC Huang, SY Yang, KH His, “Rapid fabrication of surface-relief plastic diffusers by ultrasonic embossing” Optics & Laser Technology, Volume 42, Issue 5, Pages 794-798 (2010)(SCI)
- Jing-Tang Wu, Sen-Yeu Yang, Wei-Chih Deng, and Wei-Yi Chang, “A novel fabrication of polymer film with tapered sub-wavelength structures for anti-reflection,” Microelectronic Engineering, Volume 87, Issue 10, October 2010, Pages 1951-1954(SCI)
- S.-Y. Yang, S.-C. Nian, S.-T. Huang and Y.-J. Weng, “A study on the micro-injection molding of multi-cavity ultra-thin parts,” Polym. Adv. Technol. (2009) (SCI)
- Po-Hsun Huang and Sen-Yeu Yang, “Complete reversal imprinting for fabricating microlens arrays with faithful shape replication,” J. Vac. Sci. Technol. (2009) B 27(6) (SCI)
- Tzu-Chien Huang, Jing-Tang Wu, Sen-Yeu Yang, Po-Hsun Huang, Shuo-Hung Chang, “Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating”Microelectronic Engineering, 2009 (SCI)
- Bin-Da Chan, Kuo-Huang Hsieh, and Sen-Yeu Yang, ”Thin film patterns directly fabricated using transfer stamping technique”, Journal of Micromechanics and Microengineering 19 (2009) 025010 (8pp) (SCI)
- Tzu-Chien Huang, Bin-Da Chan, Jyun-Kai Ciou, Sen-Yeu Yang,“Fabrication of Microlens Arrays Using CO2-Assisted Embossing Technique”, Journal of Micromechanics and Microengineering, 19,(2009) 015018 (SCI)
- Bin-Da Chan, Kuo-Huang Hsieh, and Sen-Yeu Yang, “Fabrication of organic flexible electrodes using transfer stamping process”, MICROELECTRONIC ENGINEERING, 2009. ( SCI)
- Yung-Jin Weng ; Yung-Chun Weng ; Huang-Sheng Fang ; Chih-Yu Ke ;Sen-Yeu Yang, “Gas-Assisted Nanoparticle Fluid Magnetic Imprinting Technology in Micro-Lens Manufacture and the Application of Projection Lithography “POLYM-PLAST TECHNOL, volume 48, Issue 5 May 2009 , pages 549 - 553
- Yung Jin Weng, Yung Chun Weng, Huang Sheng Fang, and Sen Yeu Yang, “Application of Vacuum-Assisted Filling System with Ultraviolet-Light-Emitting Diode Array to Fabrication of Waveguide Microstructures” Jpn. J. Appl. Phys. 48 (2009) 116502 (SCI)
- Huang, Jen-Ching; Weng, Yung-Jin; Yang, Sen-Yeu; Weng, Yung-Chun; Wang, Jui-Yang, “Fabricating Nanostructures by Atomic Force Microscopy” Japanese Journal of Applied Physics, Volume 48, Issue 9, pp. 095001-095001-5 (2009).
- Bin-Da Chan1, Kuo-Huang Hsieh2, and Sen-Yeu Yang1*, “Fabrication of organic flexible electrodes using transfer stamping process”, MICROELECTRONIC ENGINEERING, 2008. ( SCI, In press )
- Po-Hsun Huang, Tzu-Chien Huang, and Sen-Yeu Yang, “Bubble-free large-area replication of microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuuming” Journal of Vacuum Science and Technology B, 2008 (SCI, EI, revision under review)
- Sen-Yeu Yang* Tzu-Chien Huang, Po-Hsun Huang, and Tai-Yu Ko, “Improving Flow Balance during Filling a Multi-Cavity Mold with Modified Runner Systems” International Polymer Processing, 2008, vol. XXIII, No. 4. - 363-369 (7 pages) (SCI)
- Y. J. Weng*, Y.C. Weng, and S. Y. Yang, “The Development and Research for Applying Innovative Magnetic Soft Mold Imprinting Techniques in Microstructure Component Manufacturing” Polymers for Advanced Technologies, 2008, Volume 19, n 9, p 1177-1184 [SCI, EI, Times cited: 0] [SCI IF=1.406]
- Y. J. Weng*, Y.C. Weng, and S. Y. Yang, “Study on the formation defect of nano imprinted optical waveguide devices and nano-indentation detection” Polymers for Advanced Technologies, 2008,Volume 19, Issue 12, 1704-1709 [SCI IF=1.406]
- Fang-Sung Cheng, Pei-Ying Huang, and Sen-Yeu Yang*, “Polymer-ridge waveguide fabrication by gas-assisted UV embossing with soft mold” International Polymer Processing, 3, 312-316 (2008). [SCI IF=0.563]
- Po-Hsun Huang, Tzu-Chien Huang, Yi-Ting Sun, and Sen-Yeu Yang*, “Fabrication of large area resin microlens arrays using gas-assisted ultraviolet embossing” Optics Express, 16, No. 5, 3041-3048 (2008). [SCI, EI, Times cited: 0] [SCI IF= 4.009]
- Tzu-Chien Huang, , Jian-Ren Ciou, Po-Hsun Huang, Kuo-Huang Hsieh, and Sen-Yeu Yang*, “Fast fabrication of integrated surface-relief and particle-diffusing plastic diffuser by use of a hybrid extrusion roller embossing process” Optics Express, 16, No.1, 470-477 (2008). [SCI, EI, Times cited: 0] [SCI IF= 4.009]
- Sen-Yeu Yang*, Tzu-Chien Huang, Jyun-Kai Ciou, Bin-Da Chan, Chih-Yuan Chang, and John G. Loeser, “CO2-Assisted Embossing for fabrication of PMMA component under low temperature and with low pressure,” Journal of Micromechanics and Microengineering, 18, No. 2, 501-507 (2008). [SCI, EI, Times cited: 0] [SCI IF= 2.321]
- Fang-Sung Cheng, Sen-Yeu Yang*, and Chien-Chang Chen, “Novel hydrostatic pressuring mechanism for soft UV-inprinting processes” Journal of Vacuum Science and Technology B, 26, 132-136 (2008). [SCI, EI, Times cited: 0] [SCI IF= 1.597]
- Sen-Yeu Yang*, Tzu-Chien Huang, Po-Hsun Huang, Tai-Yu Ko,” Study on flow imbalance during filling a multi-cavity mold using a H-type runners”, Key Engineering Materials, 364-366, 1306-1311 (2008). [EI, Times cited: 0]
- Liang-Ting Jiang, Tzu-Chien Huang, Chien-Ren Ciou, Chih-Yuan Chang, Sen-Yeu Yang*, and Po-Hsun Huang, “Direct fabrication of rigid microstructures on a metallic roller using a dry film resist” Journal of Micomechanics and Microengineering, 18, No. 1, 501-506 (2008). [SCI, EI, Times cited: 0] [SCI IF= 2.321]
- Sen-Yeu Yang*, Fang-Sung Cheng, Sue-Wen Xu, Po-Hsun Huang, and Tzu-Chien Huang, “Fabrication of Microlens Arrays Using UV Micro-Stamping with Soft Roller and Gas-pressurized Platform” Microelectronic Engineering, 85, 603-609 (2008). [SCI, EI, Times cited: 0] [SCI IF= 1.398]
- Y. J. Weng*, Sen-Yeu Yang, Y.C. Weng and L.A. Wang, “Fabrication of Buried Waveguide Microstructure Using Gas-Assisted Micro/Nanoimprinting with Soft Mold,” Polymers for Advanced Technologies, 18, 993-998 (2007). [SCI, EI, Times cited: 0]
- Y. J. Weng*, Y.C. Weng, S.Y. Yang, and L.A. Wang, “Fabrication of Optical Waveguide Devices Using Gas-Assisted UV Micro/Nanoimprinting with Soft Mold,” Polymers for Advanced Technologies, 18, 876-882 (2007). [SCI, EI, Times cited: 0]
- Liang-Ting Jiang, Tzu-Chien Huang, Chien-Ren Ciou, Chih-Yuan Chang, and Sen-Yeu Yang*, “Fabrication of Plastic Microlens Arraya Using Hybrid Extrusion Rolling Embossing with a Metallic Cylinder Molf Fabricated Using Dry Film Resist,” Optics Express, 15, 12088-12094 (2007). [SCI, EI, Times cited: 0]
- Y. J. Weng, S. Y. Yang*, M.S. Wu, Y.C. Weng and L.A. Wang, “A Study on the Innovative Microlens Projection Lithography Aapplied to the Production of Microstructures,” Polymers for Advanced Technologies, 18, 841-844 (2007). [SCI, EI, Times cited: 0]
- Chih-Yuan Chang, Sen-Yeu Yang*, Meng-Shen Wu, Liang-Ting Jiang and Lon A. Wang, “A Novel Method for Fabrication of Plastic Microlens Array with Aperture Stops for Projection Photolithography,” Japanese Journal of Applied Physics, 46, 2932-2935 (2007). [SCI, EI, Times cited: 0]
- Chih-Yuan Chang, Sen-Yeu Yang*, Ming-Hui Chu, “Rapid Fabrication of Ultraviolet-Cured Polymer Microlens Arrays by Soft Roller Stamping Process,” Microelectronic Engineering, 84 355–361 (2007). [SCI, EI, Times cited: 0]
- Chih-Yuan Chang, Sen-Yeu Yang*, Long-Sun Huang and Kuo-Huang Hsieh “Fabrication of Polymer Microlens Arrays Using Capillary Forming with a Soft Mold of Micro-Holes Array and UV-Curable Polymer,” Optics Express, 14, 6253-6258 (2006). [SCI, EI, Times cited: 4]
- Fang-Sung Cheng, S. Y. Yang*, Shih-Chih Nian and Lon A. Wang, “Soft Mold and Gasbag Pressure Mechanism for Patterning Submicron Patterns onto a Large Concave Substrate,” J. Vac. Sci. Technol. B, 24, 1724-1727 (2006). [SCI, EI, Times cited: 0]
- Chih-Yuan Chang*, Sen-Yeu Yang, Long-Sun Huang and Tian-Ming Jeng, “A Novel Method for Rapid Fabrication of Microlens Array Using Micro-Transfer Molding with Soft Mold,” Journal of Micromechanics and Microengineering, 16, 999-1005 (2006). [SCI, EI, Times cited: 3]
- S. Y. Yang, C. K. Huang*, B. C. Lin and W. C. J. Wei, “Kneading and Molding of Ceramic Microparts by Precision Powder Injection Molding,” J. of Applied Polymer Science, 100, 892-899 (2006). [SCI, EI, Times cited: 0]
- C. Y. Chang, S. Y. Yang*, and J. L. Shje, “A Roller Embossing Process for Rapid Fabrication of Microlens Arrays on Glass Substrates,” Microsystem Technologies, 12, 754-759 (2006). [SCI, EI, Times cited: 4]
- C. Y. Chang, S. Y. Yang*, L. S. Huang and J. H. Chang, “Fabrication of Plastic Microlens Array Using Gas-assisted Micro Hot-Embossing with a Silicon Mold,” Infrared Physics and Technology, 48, 163-173 (2006). [SCI, EI, Times cited: 3]
B. 會議論文 CONFERENCE PAPERS
A. 國外會議論文 International Conference Papers
- Sen-Yeu Yang, Cheng-Huan Yang, Jing-TangWu and Yun-Heng Lee, “Fabrication of a microlens array on a PMMA substrate by A gasbag-roller-assisted UV imprinting technique”, The 10th International Conference nanoimprint and nanoprint technology, Oct. 19-21, Shilla Jeju, Korea, 2011.
- Wei-Yi Chang, Jing-Tang Wu, Sen-Yeu Yang and Pei-Kuen Wei, “Novel fabrication of Surface Enhanced Raman Scattering(SERS) Sensor on Polycarbonate by Gas-assisted Hot Embossing Process and Anodic Aluminum Oxide (AAO) Template”, The 9th Asian Workshop on Polymer Processing (AWPP2010), December 6 – 9, Hanoi, Vietnam
- Wei-Yi Chang, Jing-Tang Wu, Sen-Yeu Yang, Kuang-Li Lee and Pei-Kuen Wei, “Fabrication of gold sub-wavelength pores using gas-assisted hot embossing with anodic aluminum oxide (AAO) template”, 2010 International Microprocesses and Nanotechnology Conference, November 11-13, Kokura, Japan
- Jian-Wei Chen, Jing-Tang Wu, Sen-Yeu Yang, “Study of transfer stamping technique for fabricating microstructure”, The 35th International Conference on Macro and Nano Engineering(MNE), 28 September – 1 October 2009, Ghent, Belgium
- Hsin-Chun Lai, Jing-Tang Wu, Tzu-Chien Huang, Sen-Yeu Yang, “Fabrication of rigid microstructures on a metal roller using stepped rotating lithography”, The 35th International Conference on Macro and Nano Engineering(MNE), 28 September – 1 October 2009, Ghent, Belgium
- Sen-Yeu Yang, Jing-Tang Wu, Ying-Ta Chu, Yi-Hao Huang, “CO2 Gas-Assisted Micro Hot Embossing Process for Large-Area Replication of Microstructures ”, The 2nd Asian Symposium on Nano Imprint Lithography(ASNIL), 7-8 October 2009, Taipei 2009, Taiwan
- Jing-Tang Wu, Bin-Da Chan, Tzu-Chien Huang and Sen-Yeu Yang, “Imprinting with Revolving-belt for Effective and Efficient Replication of Microstructures,” The 53rd International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2009), May 26 – 30, 2009 ,Marco Island, Florida, USA
- Bin-Da Chan, Kuo-Huang Hsieh, Sen-Yeu Yang, “Development of Transfer Stamping Process to Fabricate Flexible Organic Electrodes” The 2008 International Symposium on Flexible Electronics and Displays (ISFED), 13-14 November 2008, Hsinchu, Taiwan
- Tzu-Chien Huang, Sen-Yeu Yang, Po-Hsun Huang, Shuo-Hung Chang “Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating” The 34th International Conference on Macro and Nano Engineering, 15 -18 September 2008 Athens, Greece.
- Bin-Da Chan , Kuo-Huang Hsieh, Sen-Yeu Yang, “Fabrication of organic flexible electrodes using transfer stamping process” The 34th International Conference on Macro and Nano Engineering, 15 -18 September 2008 Athens, Greece.
- Y.-J. Weng and S.-Y. Yang “A Study on the Application of Innovative Magnetically Assisted Flexible Magnetic Mold in Large-Area Curved Surface Microstructure Impressing Process Technology”, The 42nd IUPAC World Polymer Congress (MACRO2008), June 29 -July 4 ,2008, Taipei, Taiwan.
- Y.-J. Weng, Y.-C. Weng and S.-Y. Yang “Development and Research for Applying Creative Magnetic Soft Mold Imprinting Techniques in Microstructure Manufacturing”, The 42nd IUPAC World Polymer Congress (MACRO2008), June 29 - July 4, 2008, Taipei, Taiwan.
- Sen-Yeu Yang*, Tzu-Chien Huang, Yen-Hao Chen, Po-Hsun Huang, and Ying-Ta Chu “The effects of processing parameters on the oxidation of Be-Cu alloy mold inserts in injection molding”, The 42nd IUPAC World Polymer Congress(MACRO2008), June 29 - July 4, 2008, Taipei, Taiwan.
- S. Y. Yang, Y. C. Lin, and G. N. Lu “A Study on Local Compression for Injection Molding of Parts with Non-Uniform Thicknesses”, The 42nd IUPAC World Polymer Congress (MACRO2008), June 29 - July 4, 2008, Taipei, Taiwan.
- C. L. Lee, T. C. Huang,, L. T. Jian, and S. Y. Yang, “Extrusion roller embossing process for rapid fabrication of microlens arrays on PC film”, The 42nd IUPAC World Polymer Congress(MACRO2008), June 29 - July 4, 2008, Taipei, Taiwan.
- P.H. Huang, T.C. Huang, S.Y. Yang, Y.T. Sun, “Large-area fabrication of polymeric microlens array using UV gas-assisted nanoimprint process”, The 52nd International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2008), 27-30 May 2008, Portland, Oregon, USA.
- Sen-Yeu Yang, Tzu-Chien- Huang, Jian-Ren Ciou, and Po-Hsun Huang, “Diffusers with both surface-relief and particle-diffusing functions fabricated using hybrid extrusion roller embossing”, The 52nd International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2008), 27-30 May 2008, Portland, Oregon, USA.
- S.Y. Yang, T.C. Huang, J.K. Ciou, and B.D. Chan, “A CO2-assisted embossing method to fabricate polymeric microlens arrays,” 5th International Symposium on Nanomanufacturing, 23-25 Jan 2008, Singapore.
- Sen-Yeu Yang*, Tzu-Chien Huang, Yen-Hao Chen, and Po-Hsun Huang, “Effects of processing parameters on the form accuracy of plastic aspheric lenses using a BeCu mold insert in injection molding process,” The Polymer Processing Society 24th Annual Meeting, 15-19 Jun. 2008, Salerno, Italy.
- Sen-Yeu Yang*, Tzu-Chien Huang, Yen-Hao Chen, and Po-Hsun Huang, “Improving lifetime of BeCu injection mold inserts by depositing with Ni-P-PTFE layer on mold surface,” The Polymer Processing Society 24th Annual Meeting, 15-19 Jun. 2008, Salerno, Italy.
- Sen-Yeu Yang*, Tzu-Chien Huang, Jian-Ren Ciou, Po-Hsun Huang, and Jing-Tang Wu, “A Preliminary Experiment of Direct Transcription of Microstructure Using Extrusion Roller-embossing,” International Conference on Advanced Manufacturing Technology 2007 (ICAM 2007), 26-30 Nov. 2007, Tainan, Taiwan.
- L. T. Jiang, T. C. Huang, J. R. Ciou, and S. Y. Yang, “Direct Fabrication of Rigid Microstructures on Metal Rollers Using Dry Film Resist,” Proceedings, 33rd International Conference on Micro- and Nano-Engineering (MNE 2007), 23-26 Sep. 2007, Copenhagen, Denmark.
- F. S. Cheng, P. H. Huang, S. W. Xu, and S. Y. Yang, “Fabrication of Microlens Arrays Using Soft Roller Embossing with Gas-Pressurized Platform,” Proceedings, 33rd International Conference on Micro- and Nano-Engineering (MNE 2007), 23-26 Sep. 2007, Copenhagen, Denmark.
- F. S. Cheng and S. Y. Yang, “A Novel Hydrostatic Pressuring Mechanism for Soft UV-Imprinting Process,” Proceedings, 33rd International Conference on Micro- and Nano-Engineering (MNE 2007), 23-26 Sep. 2007, Copenhagen, Denmark
- S. Y. Yang, F. S. Cheng, T. C. Huang, J. K. Ciou, and J. G. Loeser, “CO2-assisted Embossing Process for Replication at Lower-than-Tg,” The 51st International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIBPN 2007), 29 May.–1 Jun. 2007, Denver, Colorado, USA.
- S. Y. Yang, C. Y. Chang, J. K. Ciou, J. H. Chang, B. D. Chan, L. A. Wang, and J. G. Loeser, “Fabrication of Micro-Lens Arrays Using CO2-Assisted Embossing,” The 51st International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIBPN 2007), 29 May – 1 Jun 2007, Denver, Colorado, USA.
- Sen-Yeu Yang, Tzu-Chien Huang, Po-Hsun Huang, Tai-Yu Ko,”Study on Flow Imbalance during Filling a Multi-cavity Mold Using a H-type Runners,” Asia Pacific Conference on Optics Manufacture 2007 (APCOM 2007), 11-13 Jan. 2007, Hong Kong, China.
- Sen-Yeu Yang, Fang-Sung Cheng, Yung-Bin Chen, and Lon A. Wang, ” An Innovative Process Using Soft Mold and Gas-Bag Pressuring Mechanism for Replicating Micro/Nano-features Onto Convex Curves Surfaces,” Great Lakes Photonics symposium 2006, 12-16 Jun. 2006, Dayton, Ohio, USA.
- Shih-Chih Nian, Sen-Yeu Yang, ”The Experiment and Simulation of Spiral Cavities Filling Process with Impact Micro-Injection Molding,” The Polymer Processing Society 22nd Annual Meeting, 2-6 Jul 2006, Yamagata, Japan.
- Shih-Chih Nian, Sen-Yeu Yang, ”The Filling Process of Molding Ultra-Thin Parts with Multi-Cavities,” The Polymer Processing Society 22nd Annual Meeting, 2-6 Jul 2006, Yamagata, Japan.
B. 國內會議論文
- Sen-Yeu Yang, Sheng-Hsin Wu, Jing-Tang Wu and Tai-Hsiang Liao, “Electrostatic-Assisted Photoresist Spray Coating and Stepped Lithographic Technique for Directly Fabricating Rigid Microstructures onto Metal Rollers” The 4th Asian Coating Workshop, Taipei, Taiwan, May 7-9, 2012
- Tai-Jung Chuang, Chen-Huan Yang, Po-Lin Chen, Sen-Yeu Yang, “Replicate Micro-structures of UV Resin by PDMS Mold and Gasbag Roller on PC Film” The 4th International Conference on Advanced Manufacturing (ICAM 2012) Jiaoxi, Yilan County, Taiwan, March 4-8, 2012
- 枋定緯、楊申語、吳景棠、梁佑豪,“超音波輔助射出成型製程探討”,中國機械工程學會第二十七屆全國學術研討會, 12月, 2010.
- 黃子健、楊申語、張所鋐,“應用浸潤式塗佈與角度步進光微影於滾輪表面製作無電鎳微結構”,中國機械工程學會第二十五屆全國學術研討會,大葉大學,11月, 2008.
- 楊申語,黃子健,邱俊凱,“CO2輔助氣體壓印製程研究”,第三十屆高分子研討會論文專輯, 1月, 2007.
- 楊申語,黃子健,黃柏勳,柯岱佑,“成型參數對一模多穴流動不平衡之影響”,第三十屆高分子研討會論文專輯, 1月, 2007.
- 楊申語,吳宗祐, “射出壓縮成型在精密圓筒件與表面微肋件之應用探討”, 第二十四屆高分子研討會論文專輯, JAN., 2001.
- 楊申語,林垂德, “加肋平板件氣體輔助射出成型之二次滲透探討”, 第二十四屆高分子研討會論文專輯, JAN., 2001.
- 楊申語,陳復東, “射出成型用之快速模具實驗探討”, 第二十四屆高分子研討會論文專輯, JAN., 2001.
- 楊申語,陳禎元, “導電複材射出成型參數對纖維分佈與電磁屏蔽效果影響之研究”, 第二十四屆高分子研討會論文專輯, JAN., 2001.
- 楊申語,劉育辰,趙啟仲,“陶瓷粉末射出壓縮成型之研究”,第二十六屆高分子研討會論文專輯, JAN., 2003. [NSC 90-2216-E-002-023]
- 楊申語,周鴻烈,張致遠,“氣輔射出圓管件尺寸脹縮及彎弧區殘留壁厚的探討”,第二十六屆高分子研討會論文專輯, JAN., 2003. [NSC 90-2216-E-002-020]
- 張哲豪,楊申語,”流體快速熱壓印成型開發研究”,中國機械工程學會第二十屆全國學術研討會,國立台灣大學,民國92 年12 月。
- 楊申語,黃榮山,陳仁浩,張致遠,羅志謙,張俊儀,黃勝田,簡維鋒,”創新型微光學增光分色片之設計與製造”,中國機械工程學會第二十屆全國學術研討會,國立台灣大學,民國92 年12 月。
- 楊申語,粘世智,簡惠民,”不等行程射出壓縮製程於楔形板件之精密成型”,中國機械工程學會第二十屆全國學術研討會,國立台灣大學,民國92年12月。
- 楊申語,黃榮山,陳仁浩,張致遠,粘世智,羅志謙,張俊儀,簡維鋒,湯競恆,羅維德,” 塑膠微透鏡陣列與微光柵繞射光學元件之設計與製作”,第二十七屆高分子研討會論文專輯, JAN., 2004. [NSC 91-2622-E-002-004]
- 陳守仁,張致遠,楊申語,”塑膠V型溝槽元件之精密成型技術研究”,第二十七屆高分子研討會論文專輯, JAN., 2004. [NSC 91-2218-E-002-031]
- 張致遠,楊申語,謝正倫,”滾輪微壓印製程開發與微光學元件之製作”,中國機械工程學會第二十二屆全國學術研討會,國立中央大學,民國94 年11月。
- 張哲豪,趙啟仲,鄭芳松,翁永春,王倫,楊申語,”軟模氣體熱壓應用於大面積微奈米壓印製程研究”,中國機械工程學會第二十二屆全國學術研討會,國立中央大學,民國94 年11 月。
- 張致遠,楊申語,黃榮山,鄭天民,”創新氣體輔助熱壓成型技術製作微透鏡陣列元件”,第九屆奈米工程暨微系統技術研討會,南台科技大學,民國94年11 月。
- 楊申語,黃子健,邱俊凱,” CO2輔助氣體壓印製程研究”,第三十屆高分子研討會論文專輯, 1月, 2007.
- 楊申語,黃子健,黃柏勳,柯岱佑,”成型參數對一模多穴流動不平衡之影響”,第三十屆高分子研討會論文專輯, 1月, 2007.
C. 專利 PATENTS
- 吳恩柏、呂文述、楊申語、蔡坤男,減翹半導體封膠外型及其製造裝置,新型專利,中華民國專利証號:155057,專利期限:1999/08/21~2010/05/07。
- 黃榮堂、楊申語,覆晶凸塊形狀及排列的設計方法,發明專利,中華民國專利証號:145183,專利期限:2001/10/21~2020/03/20。
- 黃榮堂、楊申語、江志豪,微感測器共通型封裝的方法,發明專利,中華民國專利証號:169456,專利期限:2002/12/01~2021/11/05。
- 張哲豪、楊申語,氣體微熱壓成型方法,新型專利,中華民國專利証號:193140,專利期限:2003/12/21~2022/08/15。
- 粘世智、楊申語,微型射出成型機之融膠射出機構,新型專利,中華民國專利証號:090206781,專利期限:2004/05/21~2013/04/26。
- 張哲豪、楊申語,快速加熱冷卻暨均勻施壓的微熱壓印成型方法,發明專利,中華民國專利証號:I222925,專利期限:2004/11/01~2023/06/10。
- 謝國煌、黃榮山、楊申語、王大銘、張培仁、張致遠、陳偉源,用於光電製程之微轉印方法,發明專利,中華民國專利証號:I252181,專利期限:2006/04/01~2023/08/28。
- 謝國煌、楊申語、黃榮山、劉士榮、張致遠,用於光電製程之微轉印印章的製造方法,發明專利,中華民國專利証號:I276540,專利期限:2007/03/21~2025/11/29。
- 謝國煌、楊申語、黃榮山、張致遠,微透鏡陣列之製造方法,發明專利,中華民國專利証號:I289683,專利期限:2007/11/11~2025/09/26。
- 楊申語,張致遠,朱明輝,“製作微光學結構之滾輪及其成形模具”,發明專利,專利編號:M341027,專利期限:2008/09/21~2018/03/06。
- 謝國煌、楊申語、黃榮山、劉士榮、張致遠,用於光電製程之微轉印印章與沾色裝置,發明專利,專利編號:I301450,專利期限:2008/10/01~2025/11/29。
- Sen-Yeu Yang, Fang-Sung Cheng, Tzu-Chien Huang, Po-Hsun Huang, Jian-Wei Chen “Specific-light-cured and pressure-differential embossing apparatus”, Patent number : US 7658604, duration : 2008/10/21~2028/10/21.
- Sen-Yeu Yang, Chih-Yuan Chang, Ming-Hui Chu, “Microstructure roller, microstructure fabrication method, tool for fabricating a microstructure roller”, Patent number : US 2009/0184441A1, duration : 2009/1/14~2029/1/14.
- Sen-Yeu Yang, Kuo-Huang Hsieh, Jian-Ren Ciou, Liang-Ting Jiang, Po-Hsun Huang “Color filter fabrication apparatus”, Patent number : US 2009/0183671 A1, duration : 2009/1/14~2029/1/14.
- 楊申語、張致遠、朱明輝,具微結構之滾輪構造、模具及其製作方法,中華民國專利申請中,中華民國公開編碼:200932662。
- 楊申語、黃子健、邱俊凱、詹秉達,改良式壓印裝置,中華民國專利申請中,中華民國公開編碼:200932502
- 翁永進、楊申語、翁永春、翁錦龍,”奈米級探針陣列製造方法” ,中華民國專利申請中,中華民國公開編號200902433。
- 翁永春、翁永進、楊申語、翁錦龍,”微結構的充填成形系統及其方法”, 中華民國專利申請中,中華民國公開編號200840793。
- 楊申語,黃子健,邱俊凱,詹秉達,” 微結構壓印器”,發明專利,專利編號:M353817,專利期限:2009/04/01~2018/07/24。
- Sen-Yeu Yang, Tzu-Chien Huang, Jing-Tang Wu, Hsin-Chun Lai, Ying-Ta Chu“Method for forming imprinting roller”, Patent number: US 2011/0132768 A1, duration: 2010/3/26~2030/3/26.
- 翁永進、楊申語、翁永春、翁錦龍,”奈米粉流體壓印系統及其方法” ,發明專利,中華民國專利証號:I332119,專利期限:2010/10/21~2027/03/27。
- 楊申語,許淑雯、吳景棠、詹秉達、黃子建,改良式滾輪壓印裝置,專利編號:I343865 ,專利期限:2011/06/21~2028/01/17。
- 翁永進、翁永春、楊申語、翁錦龍,”控制曝光的裝置及方法”,中華民國專利申請中,中華民國公開編號200919097。
- 翁永進、翁永春、楊申語、翁錦龍,”具精密定位裝置之精密製程/量測系統”, 中華民國專利申請中,中華民國公開編號200915035。
- 翁永進、翁永春、楊申語、翁錦龍,”具黏貼式之微結構阻劑薄膜製造方法”, 中華民國專利申請中,中華民國公開編號200841122。
- 翁永進、翁永春、楊申語、翁錦龍,”具奈米孔洞之模板的製造方法”, 中華民國專利申請中,中華民國公開編號200919099。
- 楊申語、鄭芳松、黃子健、黃柏勳、陳建瑋, “特定光固化型壓差式壓印成型設備”,中華民國專利申請中,中華民國公開編號201002534。
- Sen-Yeu Yang, Tzu-Chien Huang, Jyun-Kai Ciou and Bin-Da Chan, “Imprint Device”, Patent number: US 8052413, duration: 2009/01/14~2029/01/14.
- Sen-Yeu Yang, Sue-Wen Xu, Jing-Tang Wu, Bin-Da Chan and Tzu-Chien Huang “Structure of roller imprinting apparatus” , Publication number: US 2009/0183643 A1, duration: 2009/01/14~2029/01/14.
D. 專書 BOOKS
- S. Y. Yang, “Analysis of Post-Filling Process during Injection Molding” Ph.D. Dissertation, University of Minnesota, MN, USA
E. 得獎紀錄 HONORS
- Best Poster Awards, Sen-Yeu Yang, Cheng Huan Yang, Jing Tang Wu and Yun-Heng Lee (Fabrication of a microlens array on a PMMA substrate by A gasbag-roller-assisted UV imprinting technique), the 10th International Conference on Nanoimprint and Nanoprint Technology, Oct. 20th, 2011
- 第四屆「上銀優秀機械碩士論文獎」佳作(2007)
- 教育部產學研究「奇美獎評審團特別獎」(2007)