- K.-H. Lee, S.-Y. Yang, and J.-G. Yang, “Optimization of heat-treatment parameters in hardening of titanium alloy Ti-6Al-4V by using the Taguchi method,” Int. J. Adv. Manuf. Technol., pp. 1–9, SEP. 2016.(SCI)
- Chen,Po-Lin; Hong, Rong-Hong; Yang,Sen-Yeu. ”Hot-rolled embossing of microlens arrays with antireflective nanostructures on optical glass”, Journal of Micromechanics and Microengineering, Volume 25, number 9 SEP 2015 (SCI)(JIF:1.731,N/M: 42/137(MECHANICS), Cited No. /Self Cited No.:0/0, Cited No.:0)
- Rong-Horng Chen, Yung-Jin Weng*, Sen-Yeu Yang. “Magnetic Fluid Microstructure Curved Surface Uniform Embossing and Photocuring Process Technology”, Polymers for Advanced Technologies. Early View, Article first published online: 1 DEC 2015 (Cites in 2014. SCI. IF=1.757) (Support: MOST 103-2221-E-415 -001) (SCI) (JIF:1.757, N/M: 36/82(POLYMER SCIENCE), Cited No. /Self Cited No.:0/0, Cited No.:0)
- Cheng-Hui Lin, Rong-Hong Hong, Tsui-Hua Li, and Sen-Yeu Yang, “Development of gasbag-assisted ultraviolet-based imprinting process for replication of microstructures onto cylindrical surface,” Journal of Vacuum Science & Technology, Volume 32, Pages : 051802 (2014) (JIF:2.322, N/M: 4/17(MATERIALS SCIENCE, COATING AND FILMS), Cited No. /Self Cited No.:0/0, Cited No.:0)
- Chin-Chi Cheng, Sen-Yeu Yang, and Dasheng Lee, “Novel Real-Time Temperature Diagnosis of Conventional Hot-Embossing Process Using an Ultrasonic Transducer,” Polymer Engineering & Science, vol. 53, no. 10, pp. 2175–2182, (2013) (JIR:1.520, N/M: 61/135(ENGINEERING, CHEMICAL), Cited No. /Self Cited No.:1/0,, Cited No.:1)
- Po-Hsun Huang, Han-Ming Chen, Tzu-Chie Huang, Sen-Yeu Yang and Yu-Ting Sun, “Bubble-free replication of large area microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuuming”, Journal of Vacuum Science & Technology B. 31, 031602 (2013) (JIF:2.322, N/M: 4/17(MATERIALS SCIENCE, COATING AND FILMS), Cited No. /Self Cited No.:0/0, Cited No.:0)
- Cheng-Huan Yang and Sen-Yeu Yang, “A high-brightness light guide plate with high precise double-sided microstructures fabricated using the fixed boundary hot embossing technique”, Journal of Micromechanics and Microengineering. 23, 035033 (2013) (JIF:1.731,N/M: 42/137(MECHANICS), Cited No. /Self Cited No.:6/0,Cited No.:6)
- Cheng-Huan Yang and Sen-Yeu Yang, “Development of a Non-uniform Heating System for Micro Hot Embossing”, International Polymer Processing 28, pp.236–243 (2013) (JIF:0.512, N/M: 70/82(POLYMER SCIENCE), Cited No. /Self Cited No.:0/0, Cited No.:0)
- Tsung-Fu Yao and Sen-Yeu Yang,“CO2-assisted thermal fusion bonding of heterogeneous materials by use of surface nano-pillars”, Microsystem Technologies, Volume 19, pp.151-157 (2013) (JIF:0.875, N/M: 153/249(ENGINEERING, ELECTRICAL AND ELECTRONIC), Cited No. /Self Cited No.:0/0, Cited No.:0)
- Kuang-Li Lee, Pei-Wen Chen, Shu-Han Wu, Jhih-Bin Huang, Sen-Yeu Yang and Pei-Kuen Wei, “Enhancing Surface Plasmon Detection Using Template-Stripped Gold Nanoslit Arrays on Plastic Films”, ACS Nano, 27, pp.2931-2939 (2012) (JIF:12.881, N/M: 10/260(MATERIALS SCIENCE, MULTIDISCIPLINARY), Cited No. /Self Cited No.:42/0, Cited No.:42)
- Chia-Lin Wu, Chen-Chung Li, Chia-Fong Lu and Sen-Yeu Yang, “Development of two step carbon dioxide assisted thermal fusion PMMA bonding process”, Microsystem Technologies,14, pp.1-6 (2012) (JIF:0.875, N/M: 153/249(ENGINEERING, ELECTRICAL AND ELECTRONIC),Cited No. /Self Cited No.:1/1, Cited No.:1)
- Yung-Jin Weng and Sen-Yeu Yang, “Applying magnetic soft mold imprint technology with ultraviolet light-emitting-diode array on the fabrication of microlens arrays” Polymer-Plastics Technology and Engineering, Volume 22, Issue 5, pp.748-752 (2011) (JIF:1.481, N/M:40/83(POLMER SCIENCE),Cited No. /Self Cited No.:2/0,Cited No.:2)
- Tsung-Fu Yao, Ping-Han Wu, Tzong-Ming Wu, Chung-Wei Cheng and Sen-Yeu Yang, “Fabrication of anti-reflective structures using hot embossing with a stainless steel template irradiated by femtosecond laser”, Microelectronic Engineering, Volume 88, Issue 9, pp.2908–2912 (2011) (JIF:1.197, N/M:129/249(ENGINEERING, ELECTRICAL AND ELECTRONIC), Cited No. /Self Cited No.:12/0, Cited No. :12)
- Wei-Yi Chang, Kai-Heng Lin, Jing-Tang Wu, Sen-Yeu Yang, Kuang-Li Lee and Pei-Kuen Wei, “Novel fabrication of an Au nanocone array on polycarbonate for high performance surface-enhanced Raman scattering”, Journal of Micromechanics and Microengineering, 21, 035023 (2011) (JIF:1.731,N/M: 42/137(MECHANICS), Cited No. /Self Cited No.:8/0, Cited No.:8)
- Yung-Chun Weng, Yung-Jin Weng and Sen-Yeu Yang, “Electromagnetic Field-Aided Magnetic Soft Mold Reverse Imprinting Technology Applied in Microstructure Replication”, Polymer-Plastics Technology and Engineering, Volume 50, Issue 11, pp.1077-1083 (2011) (JIF:1.481, N/M:40/83(POLMER SCIENCE),Cited No./Self Cited No.:2/1, Cited No.:2)
- Yi-Hao Huang, Jing-Tang Wu and Sen-Yeu Yang, “Direct fabricating patterns using stamping transfer process with PDMS mold of hydrophobic nanostructures on surface of micro-cavity”, Microelectronic Engineering, Volume 88, Issue 6, pp.849-854 (2011) (JIF:1.197, N/M:129/249(ENGINEERING, ELECTRICAL AND ELECTRONIC), Cited No. /Self Cited No.:14/0, Cited No.:14)
- Wei-Yi Chang, Jing-Tang Wu, Kai-Heng Lin, Sen-Yeu Yang, Kuang-Li Lee, and Pei-Kuen Wei,“Fabrication of gold sub-wavelength pore array using gas-assisted hot embossing with anodic aluminum oxide (AAO)template”, Microelectronic Engineering, Volume 88, pp. 909-913 (2011) (JIF:1.197, N/M:129/249(ENGINEERING, ELECTRICAL AND ELECTRONIC), Cited No. /Self Cited No.:4/0, Cited No.:4)
- Yung-Chun Weng, Yung-Jin Weng, Huang-Sheng Fang and Sen-Yeu Yang, “Electromagnetic Imprint Technique Combined with Electrophoretic Deposition Technique in Forming Microelectrode Structures”, Japanese Journal of Applied Physics, Volume 50, Issue 4,pp.046502-046502-6 (2011) (JIF:1.127,N/M:97/144(PHYSICS, APPLIED), Cited No. /Self Cited No.:5/0,Cited No.:5)
- Bin-Da Chan, Kuo-Huang Hsieh and Sen-Yeu Yang, “Thin film patterns directly fabricated using transfer stamping technique”, Journal of Micromechanics and Microengineering, 19, 025010 (2010) (JIF:1.731,N/M: 42/137(MECHANICS),Cited No. /Self Cited No.:3/1, Cited No.:3)
- Jing-Tang Wu, Hsin-Chun Lai, Sen-Yeu Yang , Tzu-Chien Huang and Sheng-Hsin Wu, “Dip coating cooperated with stepped rotating lithography to fabricate rigid microstructures onto a metal roller”, Microelectronic Engineering, Volume 87, Issue 11, pp. 2091-2096 (2010) (JIF:1.197, N/M:129/249(ENGINEERING, ELECTRICAL AND ELECTRONIC), Cited No. /Self Cited No.:8/0,Cited No.:8)
- Jing-Tang Wu, Wei-Yi Chang and Sen-Yeu Yang, “Fabrication of a nano/micro hybrid lens using gas-assisted hot embossing with an anodic aluminum oxide (AAO)template”, Journal of Micromechanics and Microengineering, Volume 20, Number 7, 20 075023 (2010) (JIF:1.731,N/M: 42/137(MECHANICS), Cited No. /Self Cited No.:10/0, Cited No.:10)
- Jing-Tang Wu, Ying-Ta Chu, Sen-Yeu Yang and Chen-Chung Li , “Low-temperature embossing technique for fabrication of large-area polymeric microlens array with supercritical carbon dioxide”, Microelectronic Engineering, Volume 87, Issue 12, December pp. 2620-2624 (2010) (JIF:1.197, N/M:129/249(ENGINEERING, ELECTRICAL AND ELECTRONIC), Cited No. /Self Cited No.:5/0, Cited No.:5)
- Jing-Tang Wu and Sen-Yeu Yang, ” A gasbag-roller-assisted UV imprinting technique for fabrication of a microlens array on a PMMA substrate”, Journal of Micromechanics and Microengineering, 20 085038 (2010) (JIF:1.731,N/M: 42/137(MECHANICS),Cited No. /Self Cited No.:10/1, Cited No.:10)
- S.J. Liu, Y.C. Huang, S.Y. Yang and K.H. Hsieh, “Rapid fabrication of surface-relief plastic diffusers by ultrasonic embossing” Optics & Laser Technology, Volume 42, Issue 5, pp.794-798 (2010) (JIF:1.647, N/M:40/87(OPTICS),Cited No. /Self Cited No.:11/0, Cited No.:11)
- Jing-Tang Wu, Sen-Yeu Yang, Wei-Chih Deng and Wei-Yi Chang, “A novel fabrication of polymer film with tapered sub-wavelength structures for anti-reflection,” Microelectronic Engineering, Volume 87, Issue 10, pp.1951-1954 (2010) (JIF:1.197, N/M:129/249(ENGINEERING, ELECTRICAL AND ELECTRONIC), Cited No. /Self Cited No.:11/0, Cited No.:11)
- S.Y. Yang, S.C. Nian, S.T. Huang and Y.J. Weng, “A study on the micro-injection molding of multi-cavity ultra-thin parts,” Polym. Adv. Technol. pp.891-902 (2009) (N/M:110/248, Cited No.:13)
- Po-Hsun Huang and Sen-Yeu Yang, “Complete reversal imprinting for fabricating microlens arrays with faithful shape replication,” Journal of Vacuum Science and Technology B 27 pp. 2781- 2785 (2009) (N/M:106/248)
- Tzu-Chien Huang, Jing-Tang Wu, Sen-Yeu Yang, Po-Hsun Huang and Shuo-Hung Chang, “Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating” Microelectronic Engineering, pp.615-618 (2009) (N/M:110/248)
- Tzu-Chien Huang, Bin-Da Chan, Jyun-Kai Ciou and Sen-Yeu Yang, “Fabrication of Microlens Arrays Using CO2-Assisted Embossing Technique”, Journal of Micromechanics and Microengineering, 19, 015018 (2009) (N/M:38/139)
- Bin-Da Chan, Kuo-Huang Hsieh and Sen-Yeu Yang, “Fabrication of organic flexible electrodes using transfer stamping process”, Microelectronic Engineering, pp.586-589 (2009) (N/M:110/248)
- Yung-Jin Weng, Yung-Chun Weng, Huang-Sheng Fang, Chih-Yu Ke, Sen-Yeu Yang, “Gas-Assisted Nanoparticle Fluid Magnetic Imprinting Technology in Micro-Lens Manufacture and the Application of Projection Lithography “, Polymer-Plastics Technology and Engineering, volume 48, Issue 5, pp. 549 – 553 (2009) (Cited No.:10)
- Yung Jin Weng, Yung Chun Weng, Huang Sheng Fang and Sen Yeu Yang, “Application of Vacuum-Assisted Filling System with Ultraviolet-Light-Emitting Diode Array to Fabrication of Waveguide Microstructures” Japanese Journal of Applied Physics, 48 116502 (2009) (N/M:90/136)
- Jen-Ching Huang, Yung-Jin Weng, Jui-Yang Wang, Sen-Yeu Yang and Yung-Chun Weng, “Fabricating Nanostructures by Atomic Force Microscopy” Japanese Journal of Applied Physics, Volume 48, Issue 9, pp. 095001-095001-5 (2009) (N/M:90/136)
- Bin-Da Chan, Kuo-Huang Hsieh and Sen-Yeu Yang, “Fabrication of organic flexible electrodes using transfer stamping process”, Microelectronic Engineering, 86, pp.586-589 (2008) (N/M:110/248)
- Sen-Yeu Yang, Tzu-Chien Huang, Po-Hsun Huang and Tai-Yu Ko, “Improving Flow Balance during Filling a Multi-Cavity Mold with Modified Runner Systems” International Polymer Processing, 2008, vol. XXIII, No. 4. pp. 363-369 (2008) (N/M:88/133)
- Y. J. Weng, Y.C. Weng and S. Y. Yang, “The Development and Research for Applying Innovative Magnetic Soft Mold Imprinting Techniques in Microstructure Component Manufacturing” Polymers for Advanced Technologies,, Volume 19, n 9, pp. 1177-1184 (2008) (N/M:33/82)
- Y. J. Weng, Y.C. Weng and S. Y. Yang, “Study on the formation defect of nano imprinted optical waveguide devices and nano-indentation detection” Polymers for Advanced Technologies, Volume 19, Issue 12, pp. 1704-1709 (2008) (N/M:33/82)
- Fang-Sung Cheng, Pei-Ying Huang and Sen-Yeu Yang, “Polymer-ridge waveguide fabrication by gas-assisted UV embossing with soft mold” International Polymer Processing, 3, 312-316 (2008) (N/M:88/133)
- Po-Hsun Huang, Tzu-Chien Huang, Yi-Ting Sun, and Sen-Yeu Yang, “Fabrication of large area resin microlens arrays using gas-assisted ultraviolet embossing” Optics Express, 16, No. 5, pp. 3041-3048 (2008) (N/M:6/83)
- Tzu-Chien Huang, Jian-Ren Ciou, Po-Hsun Huang, Kuo-Huang Hsieh and Sen-Yeu Yang, “Fast fabrication of integrated surface-relief and particle-diffusing plastic diffuser by use of a hybrid extrusion roller embossing process” Optics Express, 16, No.1, pp. 470-477 (2008) [SCI IF= IF= 3.666]
- Sen-Yeu Yang, Tzu-Chien Huang, Jyun-Kai Ciou, Bin-Da Chan, Chih-Yuan Chang, and John G. Loeser, “CO2-Assisted Embossing for fabrication of PMMA component under low temperature and with low pressure,” Journal of Micromechanics and Microengineering, 18, No. 2, pp. 501-507 (2008) [SCI IF= 2.313]
- Fang-Sung Cheng, Sen-Yeu Yang, and Chien-Chang Chen, “Novel hydrostatic pressuring mechanism for soft UV-imprinting processes” Journal of Vacuum Science and Technology B, 26, pp. 132-136 (2008) (SCI IF= IF= 3.666)
- Sen-Yeu Yang, Tzu-Chien Huang, Po-Hsun Huang and Tai-Yu Ko,” Study on flow imbalance during filling a multi-cavity mold using a H-type runners”, Key Engineering Materials, pp. 364-366, 1306-1311 (2008) [EI, Times cited: 0]
- Liang-Ting Jiang, Tzu-Chien Huang, Chien-Ren Ciou, Chih-Yuan Chang, Sen-Yeu Yang and Po-Hsun Huang, “Direct fabrication of rigid microstructures on a metallic roller using a dry film resist” Journal of Micomechanics and Microengineering, 18, No. 1, pp. 501-506 (2008)
- Sen-Yeu Yang, Fang-Sung Cheng, Sue-Wen Xu, Po-Hsun Huang and Tzu-Chien Huang, “Fabrication of Microlens Arrays Using UV Micro-Stamping with Soft Roller and Gas-pressurized Platform” Microelectronic Engineering, 85, pp. 603-609 (2008) [SCI IF= 2.313]
- Y. J. Weng, S. Y. Yang, Y. C. Weng and L. A. Wang, “Fabrication of buried waveguide microstructure using gas-assisted micro/nanoimprinting with soft mold” Polymers for Advanced Technologies, 18, pp.993-998 (2007)
- Y. J. Weng, Y. C. Weng, S. Y. Yang and L. A. Wang, “Fabrication of optical waveguide devices using gas-assisted UV micro/nanoimprinting with soft mold” Polymers for Advanced Technologies, 18, pp. 876-882 (2007)
- Liang-Ting Jiang, Tzu-Chien Huang, Chien-Ren Ciou, Chih-Yuan Chang and Sen-Yeu Yang, “Fabrication of plastic microlens arraya using hybrid extrusion rolling embossing with a metallic cylinder mold fabricated using dry film resist” Optics Express, 15, pp. 12088-12094 (2007)
- Y. J. Weng, S. Y. Yang, M. S. Wu, Y. C. Weng and L. A. Wang, “A study on the innovative microlens projection lithography applied to the production of microstructures” Polymers for Advanced Technologies, 18, pp. 841-844 (2007)
- Chih-Yuan Chang, Sen-Yeu Yang, Meng-Shen Wu, Liang-Ting Jiang and Lon A. Wang, “A novel method for fabrication of plastic microlens array with aperture stops for projection photolithography”, Japanese Journal of Applied Physics, 46, pp. 2932-2935 (2007)
- Chih-Yuan Chang, Sen-Yeu Yang and Ming-Hui Chu, “Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping process” Microelectronic Engineering, 84 pp. 355–361 (2007)
- Chih-Yuan Chang, Sen-Yeu Yang, Long-Sun Huang and Kuo-Huang Hsieh “Fabrication of polymer microlens arrays using capillary forming with a soft mold of micro-holes array and UV-curable polymer,” Optics Express, 14, pp. 6253-6258 (2006)
- Fang-Sung Cheng, Sen-Yeu Yang, Shih-Chih Nian and Lon A. Wang, “Soft mold and gasbag pressure mechanism for patterning submicron patterns onto a large concave substrate”, J. Vac. Sci. Technol. B, 24, pp. 1724-1727 (2006)
- Chih-Yuan Chang, Sen-Yeu Yang, Long-Sun Huang and Tian-Ming Jeng, “A novel method for rapid fabrication of microlens array using micro-transfer molding with soft mold,” Journal of Micromechanics and Microengineering, 16, pp. 999-1005 (2006)
- S. Y. Yang, C. K. Huang, B. C. Lin and W. C. J. Wei, “Kneading and molding of ceramic microparts by precision powder injection molding”, J. of Applied Polymer Science, 100, pp. 892-899 (2006)
- C. Y. Chang, S. Y. Yang, and J. L. Shje, “A roller embossing process for rapid fabrication of microlens arrays on glass substrates,” Microsystem Technologies, 12, pp. 754-759 (2006)
- C. Y. Chang, S. Y. Yang, L. S. Huang and J. H. Chang, “Fabrication of plastic microlens array using gas-assisted micro hot-embossing with a silicon mold,” Infrared Physics and Technology, 48, pp. 163-173 (2006)
- S. C. Nian and S. Y. Yang, “Molding of Thin Sheets Using Impact Micro-injection Molding”, International Polymer Processing, Vol. 4, pp.441-448 (2005)
- J. H. Chang, F. S. Cheng, C. C. Chao, Y. C. Weng, S. Y. Yang and L. A. Wang, “Direct imprinting using soft mold and gas pressure for large area and curved surfaces”, J. Vac. Sci. Technol. A, Vol. 23, No. 6, Nov/Dec, pp.1687-1690 (2005)
- C. K. Huang, S. Y. Yang and C. C. Chen, “Influence of processing on warpage of composite parts”, Journal of Advanced Materials, Vol. 37, No. 4, pp.17-22 (2005)
- J. H. Chang and S. Y. Yang, “Development of Fluid-Based Heating and Pressing Systems for Micro Hot Embossing”, Microsystem Technologies, Vol.11, pp.396-403 (2005)
- S. C. Nian and S. Y. Yang, “Flow Visualization of filling with aid of colored billets during Impact Micro-Injection Molding”, International Polymer Processing, Vol. XIX, No. 4, pp. 402-407 (2004)
- Y. K. Shen, W. Y. Wu, S. Y. Yang, H. M. Jian and C.C. Chen “Study on numerical simulation and experiment of lightguide plate in injection molding”, Journal of Reinforced Plastics and Composites, Vol. 23, No. 11, pp.1187-1206 (2004)
- S. Y. Yang, C. K. Huang and C. C. Chen, “Effect of Processing on Precision of Composite Panels”, Materials and Manufacturing Processes, Vol. 18, No. 5, pp.769-781 (2003)
- S. Y. Yang, C. T. Lin and J. H. Chang, “Secondary Gas Penetrations in Ribs During Full-Shot Gas-Assisted Injection Molding”, Advances in Polymer Technology, Vol. 22, No. 3, pp.225-237 (2003)
- J. H. Chang and S. Y. Yang, “Gas Pressurized Hot Embossing for Transcription of Micro-features”, Microsystem Technologies, Vol. 10, No. 1, pp. 76-80 (2003)
- S. Y. Yang, S. C. Nian and I. C. Sun, “Flow Visualization of Filling Process during Micro-Injection Molding”, International Polymer Processing, Vol. XVII, No. 4, pp.354-360 (2002)
- S. H. Parng and S. Y. Yang, “Fracture types and thickness distribution in superplastic sheets formed with plastic injection molding”, Journal of Materials Processing Technology, Vol. 120, No. 1-3, pp.133-139 (2002)
- S. Y. Yang, C. Y. Chen and S. H. Parng, " Effects of conductive fibers and processing conditions on the electromagnetic shielding effectiveness of injection molded composites", Polymer Composites, Vol. 23, No. 6, pp. 1003-1013 (2002)
- S. Y. Yang and H. L. Chou, “Study on the Residual Wall Thickness at Dimensional Transitions and Curved Sections in Gas-Assisted Injection Molded Circular Tubes”, Polymer Engineering and Science, Vol. 42, No. 1, pp. 111-119 (2002)
- S. H. Parng and S. Y. Yang, “Fracture types and thickness distribution in superplastic sheets formed with plastic injection molding”, Materials and Manufacturing Process, Vol. 10, No. 4, pp. 503-518 (2001)
- S. Y. Yang and S. H. Parng, “Injection molding of plastic plates combined with boss features on superplastic Zn-22Al sheet”, International Polymer Processing, Vol. XVII, No. 4, pp.412-420 (2001)
- S. Y. Yang and S. H. Parng, “Injection Molding of Ribbed Plastic Plates with a Superplastic Zn-22% Al Sheet”, Advances in Polymer Technology, Vol. 20, No. 3,pp. 216-225 (2001)
- W. Y. Wang, W. J. Wei and S. Y. Yang , “Low Pressure Injection Molding Process of Piezoelectric Pb (Zr, Ti)O3 Ceramics ”, Bulletin of the College of Engineering, N.T.U., 79 , June, pp.11-19 (2000)
- S. Y. Yang S. C. Jiang and W. S. Lu, " Ribbed Package Geometry for Reducing Thermal Warpage and Wire Sweep during PBGA Encapsulation", IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 4, pp. 700-706 (2000)
- S. Y. Yang and P. T. Chu, “Void shape in Gas-channel Ribs in Gas-Assisted Injection Molded Plates”, Advances in Polymer Technology, Vol. 18, No. 1, pp. 11-17 (1999)
- S. Y. Yang and Y. C. Chen, “Experimental Study of Injection-Charged Compression Molding of Thermoplastics”, Advances in Polymer Technology, Vol. 17, No. 4, pp. 353-360 (1998)
- S. H. Parng and S. Y. Yang, “Gas Penetrations in Symmetrical Tapering Ribs during Gas-Assisted Injection Molding”, International Polymer Processing, Vol. 13, No. 3, pp. 318-320 (1998)
- C. K. Huang and S. Y. Yang, “Warping in advanced composite tools with varying angles and radii”, Composites Part A-Applied Science and Manfacturing, Vol. 28, No. (9-10), pp. 891-893 (1997)
- C. K. Huang and S. Y. Yang, “Experimental study on the accuracy of advanced composite tools for slanted shapes”, Polymer Composites, Vol. 18, No. 4, pp. 442-452 (1997)
- S. Y. Yang and C. K. Huang, “Curvature predictions of flat advanced composite tools based on measured volume fraction gradient”, Journal of Advanced Materials, Vol. 28, No. 2, pp. 47-55 (1997)
- C. K. Huang and S. Y. Yang, “Study on accuracy of angled advanced composite tools”, Materials and Manufacturing Processes, Vol. 12, No. 3, pp. 473-486 (1997)
- S. Y. Yang, S.J. Liou and W.N. Liou, “Flow visualization of the gas-assisted injection molding process”, Advances in Polymer Technology, Vol. 16, No. 3, pp. 175-183 (1997)
- S. Y. Yang, F.Z. Huang and W.N. Liau, “A study of rib geometry for gas-assisted injection molding”, Polymer Engineering and Science, Vol. 36, No. 23, pp. 2824-2831 (1996)
- S. Y. Yang, C. K. Huang and C. B. Wu, “Influence of processing on quality of advanced composite tools”, Journal of Advanced Materials, Vol. 27, No. 3, pp. 37-44 (1996)
- S. Y. Yang and L. Lien, “Effects of cooling time and mold temperature on quality of moldings with precision contour”, Advances in Polymer Technology, Vol. 15, No. 4, pp. 289-295 (1996)
- S. Y. Yang and L. Nien, “Experimental study on injection compression molding of cylindrical parts”, Advances in Polymer Technology, Vol. 15, No. 3, pp. 205-213 (1996)
- S. Y. Yang and M. Z. Ke, “Experimental study on the effects of adding compression to injection molding process”, Advances in Polymer Technology, Vol.14, No.1 , pp. 15-24 (1995)
- S. Y. Yang and S. J. Liou, “Development of mold ability diagrams for gas-assisted injection molding”, Advances in Polymer Technology, Vol. 14, No. 3, pp. 197-205 (1995)
- S. Y. Yang and M. Z. Ke, “Influence of processing on quality of injection-compression-molded disks”, Polymer Engineering and Science, Vol. 35, No. 15, pp. 1206-1212 (1995)
- S. Y. Yang and F. Z. Huang, “Unstable gas penetrations in symmetrical rib channels during gas-assisted injection molding”, International Polymer Processing, Vol. 10, No. 2, pp. 186-187 (1995)
- S. Y. Yang and H. C. Chang, “Study on the performance of cooling systems in precision injection molds”, International Polymer Processing, Vol. 10, No. 3, pp. 255-261 (1995)